3/12/2023 0 Comments One wire modThis is it on the motor side of the connector:Īnd this is the same wire on the truck side of the connector: I like the idea if retaining the A4wd, it hate not being able to control it, not to mention the front end drag when making a tight turn.ĥ-6ft of wire (2 strand wire, or 10-12ft single, cut in half)įirst you have to find what wire we're going to be interrupting the signal of.įinding the wire in the truck was the hard part, but here is the wire in question looking under the truck. Just to clarify, with the toggle switch off, you still can engage 4wd hi and low, but you won't have A4wd. The purpose of this mod is to be able to disable the A4wd so as to have 2wd like on the 97-99 Expeditions have. I wanted to retain the A4WD feature so I set out to make it work. Ok guys, I searched and could not find anything as far as a write-up for our Expy's relating to the "Brown Wire Mod" that was anything other than "cut the brown wire near the t-case shift motor".
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |